Oil-lubricated air compressors

Flow range：

Up to 1589 CFM or 45 m /min (dynamic flow enhancement mode)

Pressure range：

Up to 35 bar or 612 psi

High pressure diesel driven screw compressor Y35 for faster and deeper drilling applications

Lower drilling costs per meter 

Drilling pressures of 30-35 bar allow for more meters per hour and lower total cost per meter. DrillAir Y35 can drill 500 meters per day.

sustainable 

DrillAir complies with Stage IV emissions standards and is therefore suitable for sustainable projects.

Save fuel 

The DrillAir Y35 requires less than 2.2 litres of oil per 1m drilled (depending on different operating parameters).

Working pressure ranges widely

With the extended pressure range (XPR) technology, pressure can be set to anything between 15 and 35 bar, allowing faster and deeper drilling. The DrillAir Y35 is compact and efficient, reducing drilling time and associated costs in geothermal projects and setting a new benchmark for mobile drilling efficiency.

Dynamic flow enhancement technology

The integrated dynamic flow enhancement technology increases the flow from 34.8 to 39m /min (650 l/s), resulting in faster flushing, faster string reinstallation, and ultimately shorter drilling time, allowing you to save up to 30 minutes per day.

The latest and cleanest technology

These compressors are powered by Stage IV high efficiency engines that reduce harmful gas emissions. The Stage IV engine produces 50 to 96 percent fewer particulate and Nox emissions than previous models. Not only that, but these engines are more fuel-efficient.